Types of Farm Equipment: Machines, Jobs and Connections

Short answer: the main types of farm equipment fall into two halves. The first is power units: agricultural and compact utility tractors, plus skid steers, utility vehicles, telehandlers and self-propelled machines such as combines. The second is implements, the tools those machines carry, pull or drive, grouped by job: ground preparation, seeding, spreading and spraying, hay and forage, harvesting, material handling, and land maintenance. What makes them work together is a small set of connections (the three-point hitch, the drawbar, the PTO, hydraulic remotes and loader mounts), and each connection has a specification that decides whether a given implement fits a given machine.

This guide is a map of the vocabulary. It explains what each family of machine does and how it connects, and points you to the checks that matter before you hitch, buy or borrow anything.

Two halves: power units and implements

Most farm equipment is not a standalone machine. A rotary cutter, a seed drill or a hay rake has no engine of its own; it relies on something else to move it and, often, to drive it. That is why the vocabulary can feel hard to learn: half of it describes machines, and the other half describes what plugs into them.

Thinking in two halves helps:

  • Power units supply movement and power. They have the engine, the transmission and the operator's seat.
  • Implements do the work. They are mounted on, pulled by or driven by a power unit.

A self-propelled machine combines both. A combine harvester or a self-propelled sprayer carries its own engine and its own working parts, and it is built for one family of jobs.

Power units: the machines that move and drive everything

Agricultural and compact utility tractors

The tractor is the general-purpose power unit. Its job is to pull, lift and drive implements, and almost every implement family in this guide is designed around it. Tractors are sold in classes, commonly described as sub-compact, compact, utility and larger row-crop or four-wheel-drive machines. The class names are useful shorthand, but makers draw the lines differently, so the specification sheet for the actual model matters more than the label.

What a tractor offers an implement comes down to a few numbers and connections: PTO horsepower, three-point hitch category and lift capacity, hydraulic flow and the number of remote outlets, and whether it accepts a front loader. Those are the figures that decide which implements it can run.

Skid steers and compact track loaders

These are built around a front attachment plate and the machine's own hydraulics rather than a rear three-point hitch and PTO. They are suited to loader work: buckets, pallet forks, grapples and hydraulically driven attachments. They do not run three-point implements.

Utility vehicles

Utility vehicles (UTVs) carry people, tools and light loads around a property. They are transport, not implement power units, and most do not have a PTO or a three-point hitch.

Telehandlers

A telehandler is a lifting machine with a telescopic boom. It reaches higher and further than a tractor loader, which is why it is used for stacking bales or moving pallets. Like the skid steer, it works through its own attachment carriage.

Self-propelled machines

Combine harvesters, self-propelled forage harvesters, windrowers and self-propelled sprayers are single-purpose machines. They are mostly found on larger operations, and their fitment questions are about headers and attachments for that machine rather than about a tractor.

How the machines connect: the part most guides skip

Lists of farm equipment usually stop at names. The more useful question for an owner is how each implement connects, because that is where a purchase either fits or does not.

Connection What it does What decides fit
Three-point hitch Carries and lifts a mounted implement at the rear Hitch category, lift capacity, lower-link spread, implement weight
Drawbar Pulls a trailed implement Drawbar position and the implement's hitch design
PTO (power take-off) Drives the implement's moving parts PTO speed, spline type, driveline length, PTO horsepower
Hydraulic remotes Power cylinders and motors on the implement Number of outlets, coupler type, flow
Front loader mount Carries a loader and its attachments Loader made for that tractor model, attachment plate style
Attachment plate (skid steer and some loaders) Holds buckets, forks, grapples Plate standard and the machine's rated capacity

The three-point hitch is the most common link between a tractor and a mounted implement. Its size class is set by the hitch category, which is covered in our guide to three-point hitch categories and how to identify yours.

The PTO is how most implements get rotating power. The Safety, Health and Wellness in Agriculture community's page on Power Take-Off Safety (dated May 14, 2025, read 2026-10-02) describes it this way: "A power take-off (PTO) shaft transfers mechanical power from a tractor to an implement," and states that "A PTO shaft rotates at a speed of either 540 rpm (9 rotations per second) or 1,000 rpm (16.6 rotations per second)." Our explainer on PTO 540 vs 1000 rpm covers why those two speeds are not interchangeable.

Types of farm equipment by job

Ground preparation

Plows, disc harrows, chisel plows, field cultivators and rotary tillers break up, turn or loosen ground. Most mount on the three-point hitch or are pulled from the drawbar. Rotary tillers are also PTO-driven, which makes them demanding on PTO horsepower for their width.

Seeding

Seed drills, planters and broadcast seeders place or scatter seed. Smaller units are three-point mounted; larger ones are trailed and often need hydraulic remotes to raise, lower or drive parts of the machine.

Spreading and spraying

Spreaders distribute granular material, and sprayers apply liquids through a boom or nozzles. Both come as three-point mounted, trailed and self-propelled versions. The machine side of a sprayer (pump, boom, nozzles, PTO drive) is a fitment question; what goes in the tank is governed by the product label, not by the machine.

Hay and forage

Hay is a good example of several implements working in sequence. A disc mower, sickle bar mower or mower-conditioner cuts the crop. A tedder spreads it to dry. A rake gathers it into rows. A round or square baler packs it into bales. Each of these machines has its own connection needs: most mowers and balers are PTO-driven, many rakes and tedders are ground-driven or hydraulic, and the baler is usually the heaviest user of PTO power in the sequence.

Harvesting

Combines harvest grain and are self-propelled, with interchangeable headers for different crops. Smaller operations may hire this work rather than own the machine.

Material handling

Front-end loaders, buckets, pallet forks, bale spears and grapples move material. On a tractor, the loader must be made for that tractor model, and the attachment plate decides which attachments it accepts. The same kinds of attachments exist for skid steers through their own plate.

Land and property maintenance

Rotary cutters, flail mowers, box blades, land planes, rear blades and post hole diggers keep pasture, trails, driveways and fence lines in order. These are common on smaller properties run with a compact utility tractor, and most mount on the three-point hitch. Rotary cutters, flail mowers and post hole diggers are also PTO-driven.

Transport

Wagons and farm trailers move material around a property. Road towing ratings and trailer rules are a separate subject, set by the vehicle maker and local law, and are not covered here.

How they work together: one example

Take a small hay operation run with one compact utility tractor. Over a season the same tractor might:

  1. Carry a PTO-driven disc mower on the three-point hitch to cut the field.
  2. Swap to a tedder, then a rake, on the three-point hitch or drawbar.
  3. Hitch a small baler to the drawbar and drive it from the PTO.
  4. Fit a bale spear to the front loader to move bales.

Every one of those steps uses a different connection, and every one has a specification that has to match the tractor: PTO speed and horsepower for the mower and baler, hitch category and lift capacity for the mounted tools, hydraulic outlets for any implement with cylinders, and loader capacity for the bales. That is the whole idea behind this site's farm equipment fitment checks.

The chain that decides fit

Whatever the machine, compatibility is established the same way, by walking a chain from your machine to the part or implement:

Make → Model → Year → Serial Number → Part Number → Specifications → Application

The make and model narrow the family. The year and serial number pin down which version you have, because makers change parts within a model run. The part number identifies the exact component. The specifications (hitch category, PTO speed, coupler type, capacities) say whether it fits. The application is the job you will ask it to do, and whether the machine is rated for it.

This is the point to check before you act. Any implement, attachment or part should be confirmed against your machine by the equipment manufacturer, the operator's manual for your model and serial number, or a qualified equipment dealer or technician before you fit or operate it. Ohio State University Extension's Compact Utility Tractor Safety fact sheet (AEX-790.32, dated November 20, 2015, read 2026-10-02) puts it plainly: "Always read and follow the manufacturer provided operator's manual before using a compact tractor."

What this guide does not cover

This is a vocabulary map for machines and how they connect. It does not cover what to grow, how to farm, irrigation systems, livestock handling, or road towing. It does not rank brands or recommend models: the right machine depends on the job, the ground and the machines you already own.

FAQ

What are the main types of farm equipment?

Power units (agricultural and compact utility tractors, skid steers, utility vehicles, telehandlers and self-propelled machines such as combines) and implements grouped by job: ground preparation, seeding, spreading and spraying, hay and forage, harvesting, material handling, and land maintenance.

What is the difference between an implement and an attachment?

The words overlap. Implement usually means a tool that mounts on the three-point hitch or is pulled from the drawbar, such as a rotary cutter or a plow. Attachment usually means something that fits a loader or skid steer plate, such as a bucket, pallet forks or a grapple.

Can any implement go on any tractor?

No. Fit depends on hitch category, lift capacity, PTO speed and horsepower, hydraulic outlets and couplers, and the implement's weight and width. Check each against your tractor's manual and the implement maker's specifications.

What farm equipment does a small property need first?

There is no single starter set. A front loader, a rotary cutter and a box blade between them cover moving material, cutting rough ground and grading, but the right set depends on your ground, your jobs and the tractor you already have.

What does PTO mean on farm equipment?

PTO stands for power take-off, the shaft that transfers mechanical power from a tractor to an implement. PTO shafts run at either 540 rpm or 1,000 rpm, and an implement must match the tractor's PTO speed and spline type.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top